Stealth Transitional Implant Components
| Description |
Dia. |
Height |
| Short One-Piece Acrylic Sleeve for 4.0mm Stealth Abutemt (4) |
6.0mm |
6.0mm |
| Tall One-Piece Acrylic Sleeve for 4.0mm Stealth Abutemt (4) |
5.0mm |
10.0mm |
| Straight Stealth Latch Driver |
| Angled Stealth Latch Driver |
Transitional Implants Considerations
• Drill a 2.0mm osteotomy to appropriate depth with Bicon’s 2.0mm pilot drill with external irrigation.
• Take care not to overheat the bone while drilling at ~1,100 RPM.
• Pilot bur is marked at 6.0mm, 8.0mm, 11.0mm and 14.0mm.*
• Be sure to drill to appropriate depth of intended implant to be placed or slightly beyond if the anatomy permits.
• Make note of the quality of bone.
• The Stealth and O-ring implants are available in 8.0mm and 12mm lengths and either straight or angled.
• Check angulation or trajectory of osteotomy with a paralleling pin.
• Remove appropriate transitional implant from packaging and insert apical end of implant into osteotomy.
• Assemble appropriate transitional implant driver to Bicon’s 400:1 handpiece or a comparable slow speed latch-type handpiece.
• Slowly screw implant into the prepared osteotomy.
